• Always make sure that PC’s or other sensitive electronic devices have a dedicated power circuit.
Cable shielding
Ensure that cable shielding is not damaged during installation and that all cables are properly
shielded.
7.2 Cyclone connections overview
The Cyclone Open Array Radar includes the following connectors:
1.
Power connector — Connects to the Cyclone power cable
2. RayNet connector — Connects to a (RayNet) Radar data cable
7.3 Cable routing options
You can route the power cable and data cable away from the radar in different ways.
The routing options allow for the cable to exit the radar in two different positions — the option you
choose will depend on the radar mounting location.
1.
Rear cable exit
— if the radar is mounted on an extended flat surface, and the cable cannot be
routed through the surface.
2.
Surface cable exit
— if the radar is mounted on a flat surface, and the cable can be routed
through the surface.
39
Summary of Contents for CYCLONE
