4.3 Fitting the display in the cradle
Follow the steps below to fit the display into the cradle.
D12645-3
1
4
5
2
3
0
0
0
0
1. Ensure the cradle is securely mounted.
2. Position the display so that the guide on the left hand side
of the display lines up with the guide on the left hand side
of the cradle.
3. Pivot the display so that the guide on the right hand side of
the display lines up with the guide on the right hand side of
the cradle.
4. Place your thumb on the front of the display and your fingers
behind the tab.
5. Push the display into the cradle until it clicks into place
securely.
4.4 Fitting the 7 inch display in the
cradle — Cradle down
Follow the steps below to fit the 7 inch display into the cradle
in the cradle down orientation.
Note:
When mounting the cradle in the cradle down
orientation the display must still be fitted the correct way up.
1
4
5
2
3
D13036-1
1. Ensure the cradle is securely mounted.
2. Position the display so that the guide on the right hand side
of the display lines up with the guide on the right hand side
of the cradle.
3. Pivot the display so that the guide on the left hand side of
the display lines up with the guide on the left hand side of
the cradle.
4. Place your thumb on the front of the display and your fingers
behind the locking tab.
5. Push the display into the cradle until it clicks into place
securely.
Engaging the safety latch
The cradle supplied with the 7 inch display includes a Safety
Latch that should be used to help secure the display to the
cradle.
Note:
The Safety Latch MUST be used when mounting
in the cradle down orientation, alternatively you can use a
compatible third party security lock.
D13039-1
1
2
1.
Safety Latch in unlocked position.
2.
Safety Latch in locked position.
Follow the steps below to engage the safety latch:
1. Remove the blanking plug from the hole on the rear of the
display that lines up with the cradle’s safety latch.
2. Insert the blanking plug into the hole that will be left exposed.
3. Ensure the Safety Latch is in the unlocked position.
4. Fit the display to the cradle following the relevant procedure.
5. Push the Safety Latch in and turn clockwise to the locked
position.
26
Dragonfly / Dragonfly 7
Summary of Contents for Dragonfly
