background image

32                                                                                                                                                                           Raymarine DSM400  Digital Sounder Module

However, if you are not able to obtain your requirements from 
the dealer, contact Raymarine Technical Services at:

1-603-881-5200 ext. 2333

Technical Service is available Monday through Friday 4.00AM to 
6.00PM Eastern Time.
Please have the Raymarine item or part number ready when 
calling if placing an order. If you are not sure which item is 
appropriate for your unit, you should contact the Technical 
Support Department to verify your requirements.

Technical Support

For technical support, call:

1-603-881-5200 ext 2444

Raymarine Technical Support Specialists are available to 
answer questions about installing, operating and troubleshooting 
all Raymarine products.

Product repair and service

In the unlikely event that your Raymarine unit should develop a 
problem, please contact your authorized Raymarine dealer for 
assistance. The dealer is best equipped to handle your service 
requirements and can offer timesaving help in getting the 
equipment back into normal operation.
In the event that repairs cannot be obtained locally, product 
service may also be obtained by returning the unit to:

Raymarine Inc.
Product Repair Center
21 Manchester Street
Merrimack, NH03054-44821

The Product Repair Center is open Monday through Friday 8.15 
AM to 5.00 PM Eastern Time. 

All products returned to the Repair Center are registered upon 
receipt. Should you wish to enquire about the repair status of the 
unit, contact the Product Repair Center at:

1-603-881-5200 ext 2118

Please have the unit serial number ready when you call. We will 
do everything possible to make the repair and return your unit as 
quickly as possible.

Worldwide

Please contact the authorized dealer in the relevant country as 
listed on the website at 

www.raymarine.com

In Europe

In Europe, Raymarine support, service and accessories may be 
obtained from your authorized dealer or by contacting:

Raymarine plc
Anchorage Park
Portsmouth
Hampshire
England
PO3 5TD

Tel: +44 (0) 23 9269 3611
Fax: +44 (0) 23 9269 4642

Technical Support

Raymarine Technical Services Department handles enquiries 
concerning installation, operation, fault diagnosis and repair.
To contact the Technical Helpdesk:

Tel; +44 (0) 23 9271 4713

DSM400 Installation Guide.book  Page 32  Tuesday, November 4, 2008  4:53 PM

www.busse-yachtshop.de  |  info@busse-yachtshop.de

Summary of Contents for DSM400







































Reviews: