11.1 Camera technical specification
Power requirements
PoE Class 3 device
Power consumption
• 4.8 W typical — without demister
• 12.5 W Max — with demister
Environmental
Installation environment
• Operating temperature: -25ºC to
+55ºC (-13ºF to 131ºF)
• Storage temperature: -30ºC to
+70ºC (-22ºF to 158ºF)
• Relative humidity: max 95%
• Waterproof to IPX6
• Wind: 100 knot (115.2 mph)
• Vibration: IEC 60945;
MIL-STD-810E
• Sand/dust: MIL-STD-810E
• Salt Mist: IEC60945;
MIL-STD-810F
Electromagnetic compliance
EMI: IEC 60945
Dimensions
• Base diameter: 178 mm (7 in.)
• Height: 152 mm (6 in.)
Weight
<1.4 kg (3 lb) depending on camera
variant.
Video out
• NTSC = <9Hz and 30Hz
• PAL = <9Hz and 25Hz
Depending on camera model.
Pan and Tilt adjustments
• Pan = ±30º
• Tilt = +34º to –27º
Note:
Pan and Tilt angles are
fixed during installation.
Video resolution
• 320 x 240
• 640 x 480
Depending on camera model.
Field of View
• 24º x 18º
• 25º x 20º
Depending on camera model.
11.2 PoE Injector technical
specification
Nominal input voltage
12 or 24 V dc
Operating input voltage range
9 V dc to 36 V dc
Power consumption
22 W Max
Output voltage
48 V dc @ 0.35 A
Output power
17 W Max
Environmental
Installation environment
• Operating temperature: -25ºC to
+75ºC (-13ºF to 167ºF)
• Storage temperature: -40ºC to
+85ºC (-40ºF to 185ºF)
• Operation humidity: 5% to 90%
• Vibration: IEC 60945;
MIL-STD-810E
• Sand/dust: MIL-STD-810E
• Salt Mist: IEC60945
Electromagnetic compliance
FCC Class B, EN55022 Class B,
EN60950, EN60945
Dimensions
• Length: 85 mm (3.35 in)
• Width: 57 mm (2.24 in)
• Height: 36 mm (1.42 in)
Weight
.45 kg (1 lb)
Connector type
RJ45 ethernet 10 / 100 / 1000 M/bits
T200
