background image

112

Raymarine H6 - Owner’s Manual

Audio-visual control unit

The audio-visual (AV) control unit provides a master control for the entertainment 
system and can be used to play both CD and DVD’s. The unit has the following 
controls:

            

Selector switch

 - select OFF, ON or AUX input.

Eject button

 - Press to eject the disk.

Volume control

 - turn to increase/decrease volume levels.

When using the AV control unit, the volume levels for the whole of the 
entertainment system can be controlled from the unit. 

If a CD or DVD is paused or stopped for 30 minutes, the system will enter screen-
saver mode. To return to the CD/DVD, press play for the relevant application on 
the remote control unit, and it will restart.

To eject a disk from the unit, simply press the eject button. There is no need to stop 
playback or turn the disk off using the remote control unit.

off

on

aux

.

Selector

switch

Volume
control

Eject button

Infra-red

sensor

81238_1.book  Page 112  Thursday, September 16, 2004  2:49 PM

Summary of Contents for H6

































































































































































































Reviews: