26.7 ClearCruise settings (Augmented Reality)
Augmented Reality settings can be edited in the
[ClearCruise]
tab in the
Video app.
Setting
Description
[AIS labels]
Enables/disables the display of other vessels as
Augmented Reality flags (requires AIS).
[Hide static targets]
Enables/disables the display of AIS targets travelling
under 2 knots (requires AIS).
[Waypoints]
Enables/disables the display of Waypoint
Augmented Reality flags.
[Chart objects]
Enables/disables the display of Chart objects
(requires compatible charts).
[Cartography source]
Select the cartography source that the ClearCruise™
features will use for the display of chart objects
in the Video app Augmented Reality features.
(Requires compatible charts).
[Compass]
Enables/disables the display of the Compass bar in
the Video app.
[Range limit]
Sets the maximum range at which the camera will
detect and display Augmented Reality flags. This
range is displayed visually in the Chart app with
the “FOV cone”. Refer to:
For the maximum range supported by your camera,
refer to:
Note:
The variety of chart objects is dependent on the selected cartography
source. For more information on different cartography sources, refer to:
Range limit
The Range Limit is the maximum range at which ClearCruise™ can display AIS
targets, Waypoints and Chart Object flags in the Video app.
The range limit can be checked using the Field of View (FOV) cone in the
Chart app. All AIS targets, Waypoints and Chart Objects within the area of
coverage of the FOV cone can be displayed as Augmented Reality flags in
the Video app. For more information, refer to:
398
Summary of Contents for LIGHTHOUSE 4
