32
Chapter 4: Waypoints, Routes and Tracks
4.1 Waypoints
Waypoints are used to mark specific locations or points of interest.
Waypoints can be used in the Chart and Fishfinder apps. Your display
can store up to 5,000 waypoints, which can be sorted in up to 200
waypoint groups.
In the Chart app you can navigate to a waypoint by selecting
Goto
from the Waypoint context menu.
Waypoints can be imported and exported from the display. For more
information, refer to:
Placing a waypoint (Quick method)
To place a waypoint at a specific location in the Chart or Fishfinder
apps, follow the steps below.
1. Use the
Directional pad
to place the cursor over the desired
location and press the
Waypoint
button.
The app will be in cursor mode and the waypoint saved notification
is displayed.
Note:
If there is no interaction with the notification within 5 seconds the
notification will automatically close, saving the waypoint with the
default values.
2. If required, select a recent waypoint symbol that you want to assign
to the waypoint.
3. Press the
OK
button.
The waypoint will be saved with the chosen symbol, in the waypoint
group shown against
Group:
.
