3.5 Display settings
Display and shared brightness
You can change the brightness of the individual display, or
networked displays.
You can only use and set shared brightness on displays which
support sharing and are assigned to network groups .
You will not be able to set shared brightness levels on displays
which do not support sharing.
Adjusting the displays brightness
To adjust the brightness of the individual display:
1. Whilst in a favorite page momentarily press the
LEFT SOFT
button.
This will open the brightness setting screen.
2. Use the
UP
and
DOWN
buttons to change the brightness
percentage to the required level.
3. Press the
RIGHT SOFT
button to confirm new brightness and go
back to the favorites page you were on.
Assigning A Network Group
When assigned to a network group you can change brightness level
and color scheme on displays which support sharing.
To enable shared brightness and color schemes the display must
be assigned to a network group as follows:
1. Navigate to
Menu > Set Up > System Set Up > Network Group
.
A list of network groups will be displayed:
• None (default)
• Helm 1
• Helm 2
• Cockpit
• Flybridge
• Mast
• Group 1 — Group 5
2. Use the
UP
and
DOWN
buttons to highlight the required group.
3. Press the
SELECT
button to assign the display you are using
to that network group.
4. Navigate to
Menu > Set Up > System Set Up >
Brightness/Colour Group
.
You will be presented with the following options:
• This Display
• This Group
5. Highlight and select the required setting.
6. Carry out steps 1 to 5 on all displays you wish to share.
Adjusting the shared brightness
Shared brightness is only accessible if the display has been
assigned to a network group.
1. Whilst on a favorites page press the
LEFT SOFT
button to
display the brightness setting.
2. Press the
LEFT SOFT
button again to access the shared
brightness settings.
3. Use the
UP
and
DOWN
buttons to change the shared brightness
level.
Display and system brightness can also be accessed via
Menu >
Display settings > Brightness
.
Display and shared color
The p70 / p70r can set a color scheme for the individual display or
for the system (if color is available on the network displays).
Color settings can be accessed via
Menu > Display settings >
Colors
.
Color schemes available are:
Getting started
19
Summary of Contents for P70
