ii. Use the
UP
and
DOWN
buttons to set the value you want,
then press
SAVE
to save the setting and return to the Pattern
settings screen.
iii. Repeat steps i and ii as necessary, for the other parameters.
6. When all parameters are set as required, and with the pattern
settings screen displayed, press
AUTO
. The autopilot then
steers the boat over the fishing pattern you selected.
To return to manual steering at any time, press
STANDBY
.
The 2 most commonly used fishing patterns are available from the
Mode
menu as
Pattern 1
and
Pattern 2
, you may select and then
complete steps 5 and 6 above to quickly use your favorite patterns.
5.5 Track mode
You can use track mode to automatically steer your vessel along a
route plotted on your chartplotter.
In Track mode, the SmartPilot maintains a route between
waypoints created on a chartplotter system. It makes any course
changes necessary to keep your vessel on course, automatically
compensating for tidal streams and leeway.
Track mode is available only if you have connected the SmartPilot to
a suitable navigation system which includes active navigation (Goto
or Follow) in your chartplotter, and provides SeaTalk, SeaTalk
ng
, or
NMEA information.
1
2
3
2
D12111-1
Item
Description
1.
Route leg
2.
Waypoints
3.
Destination
Using track mode
Start with your connected chartplotter following a route.
1. To enter track mode, from the
Main menu
select
Mode
.
Pilot modes
33
Summary of Contents for P70
