background image

 

                             27

Raymarine World Wide Warranty

Raymarine Inc.

APPLICABLE TO PRODUCTS SOLD THROUGH OFFICIAL RAYMARINE INC. DEALERS, 
DISTRIBUTORS AND BOAT BUILDERS WITHIN THE AMERICAS AND CARIBBEAN.

Limited warranty

Subject to the terms, conditions and limitations set forth in this U.S. Limited Warranty 
(hereinafter the ‘Warranty’), Raymarine warrants that its products, when properly 
installed and used, will be free from defects in material and workmanship for a period of 
twenty-four (24) months (with respect to VHF radios, a period of thirty-six (36) months), 
from the date of first purchase (the ‘Warranty Period’).

For the purposes of this warranty, ‘date of first purchase’ means the date that the product 
was purchased by the first retail customer; or in the case of a product installed on a new 
vessel by a certified Raymarine original equipment manufacturer (a ‘Raymarine OEM’), 
the date that such vessel was purchased by the first retail customer.

Raymarine will, at its sole option, repair or replace any defective products or components 
returned during the Warranty Period in accordance with the terms, conditions and 
limitations set forth below. 

Such repairs or replacement will be the sole remedy 

of the customer under this Warranty.

Obtaining Warranty Service

Standard Warranty Service

To qualify for standard warranty service the product must be returned to a Raymarine-
certified service agent, or directly to Raymarine in person, or by mail (i) within the 
Warranty Period, and (I) within thirty (30) days of the alleged product failure.Any 
products returned by mail must be securely packaged and sent pre-paid and insured to 
Raymarine or to a Raymarine-certified service agent. All products, whether returned in 
person or by mail, must be accompanied by a copy of the original sales receipt, to be 
eligible for standard warranty service. 

A list of Raymarine-certified service agents is available from Raymarine Technical Support 
or at 

www.raymarine.com

‘On Board’ Warranty Service

For any Raymarine product or system that (i) has been installed on your vessel by a 
Raymarine-certified service agent or by a Raymarine OEM, and (ii) has a MSRP equal to or 
greater than USD $2,500, you are eligible to receive warranty service by a Raymarine 
certified service agent on-board your vessel (‘On Board Warranty Service’) for a period of 
12 months from the date of first purchase of such product or system, or the date of first 
purchase of the vessel on which such product or system has been installed (the ‘On Board 
Warranty Period’). In order to obtain On Board Warranty Service eligible customers 

MUST

:

(i) within the On Board Warranty Period, and (ii) within thirty (30) days from the 
date of the alleged failure giving rise to the warranty claim for which you are 
requesting On Board Warranty Service, contact a local Raymarine-certified ser-
vice agent and request On Board Warranty Service.

Present to the Raymarine-certified service agent a copy of the original sales 
receipt for the product, together with proof of the date of installation of the 
product by a Raymarine-certified service agent. The service agent may at its 
sole option, accept or deny such proof of purchase and proof of installation as 
sufficient to qualify you for On Board Warranty Service.

Costs associated with travel, mileage, taxi fares, launch or docking fees, aircraft or vehicle 
rental, meals, customs, shipping, communication charges, and service agent travel costs 
are specifically excluded from coverage under this Warranty and are your responsibility.

 

In addition

, this Warranty does not cover fees associated with hauling, shipping or 

towing your vessel to a Raymarine-certified agent.

Upon the expiration of the On Board Warranty Period, you are still eligible to receive 
standard warranty service for the remaining term of the Warranty Period, but will not be 
eligible for continued On Board Warranty Service.

Summary of Contents for Radome Scanners





































Reviews: