Raymarine Ray 90 Installation & Operating Instruction Download

Page: 16 / 107

2.5 Obtain MMSI (Maritime
Mobile Service Identity) number

Before commencing installation ensure you have
obtained a MMSI number for your vessel.

A MMSI is a 9 digit number which is sent over a radio
frequency channel in order to identify the originating
vessel/station. If your vessel already has a MMSI number
(used for a VHF DSC radio) then the same MMSI number
must be used to program your product.

Note:

If a MMSI number is not entered, the DSC functionality
of your radio will be disabled.

In the United States of America, the MMSI and Static
Data must be entered only by a Raymarine® dealer
or other appropriately qualified installer of marine
communications equipment on board vessels.
The user is NOT authorized to do this.

In some areas, a radio operator licence is required
before a MMSI number will be issued. You can request
a MMSI number from same agency that issues radio or
Ship Radio licences in your area.

In Europe and other parts of the world outside of the
United States of America, the MMSI and Static data can
be set up by the user.

For further details, refer to the relevant
Telecommunications Regulatory Body for your
area.

Refer to

Appendix C MMSI Regulatory bodies and

application submissions

for a list of contacts for obtaining MMSI numbers for
some areas.

Warning: MMSI entry

You can only enter a MMSI number once, if
you enter the number incorrectly or need
to change your MMSI number, the unit will
require re-programming by an authorized
dealer.

2.6 Automatic Transmitter
Identification System (ATIS)

Your product includes ATIS functionality for use on the
inland waterways of contracting governments of the

“Regional Arrangement on the Radiocommunication
Service for Inland Waterways”

— also known as

“RAINWAT”

ATIS adds data at the end of radio transmissions that
identifies your station. ATIS operation can be turned on
or off as needed via the radio’s menu.

An ATIS ID can be obtained from the same agency that
issues radio operator licenses in your area.

Your ATIS ID should be programed into your product
using the instructions provided.

Note:

Contracting RAINWAT countries include: Austria,
Belgium, Bulgaria, Croatia, the Czech Republic,
France, Germany, Hungary, Luxembourg, Moldova,
Montenegro, the Netherlands, Poland, Romania,
Serbia, the Slovak Republic and Switzerland.

Note:

When ATIS is enabled, certain programing steps
have been implemented to protect the integrity of
the RAINWAT agreement, including the blocking of
DSC functions when ATIS is enabled.

2.7 Parts supplied

The following parts are supplied with your product.
Please ensure your box contents are correct before
proceeding with the installation.

Ray90 / Ray91 VHF DSC Radio (including fitted
power and data cable)

2. Raymic handset cradle

Raymic handset

Raymic handset adaptor cable (12 pin female to 12
pin male with RCA Audio)

5. Passive speaker

6. Passive speaker mounting gasket

Passive speaker mounting screws x 4

8. Documentation

VHF radio mounting screws x 4

10. Handset cradle mounting screws x 4