4.7 NMEA 0183 connection
The NMEA 0183 wires can be used to connect the unit
to a NMEA 0183 GNSS (GPS) receiver or MFD.
1.
Yellow = Receive positive (+) wire
2. Green = Receive negative (-) wire
3.
White = Transmit positive (+) wire
4.
Brown = Transmit negative (-) wire
The NMEA wires should be connected to a compatible
device as shown in the table below:
NMEA 0183 wires
NMEA 0183
device
Receive positive (+)
to
Transmit positive
(+)
Receive negative (-)
to
Transmit negative
(-)
Transmit positive (+)
to
Receive positive
(+)
Transmit negative (-)
to
Receive negative
(-)
4.8 Loud hailer connection
A Loud hailer (M95435) can be connected to the radio
using the loud hailer wires.
1
Positive (+) hailer wire (Purple)
2
Negative (-) hailer wire (Gray)
31
81377-1-en_US_PRINT.pdf 31
12/21/2017 9:05:37 PM
