3-16
Operations
3.5.6 Setting the Frequency Mode (RAY 230E)
3.5.6 Setting the Frequency Mode (RAY 230E)
3.5.6 Setting the Frequency Mode (RAY 230E)
3.5.6 Setting the Frequency Mode (RAY 230E)
3.5.6 Setting the Frequency Mode (RAY 230E)
Select the channel frequency group to be used from either US or
International. Indicators displayed in the LCD identify the active frequency
group: US for the US frequency group or INT for the International group.
Changing the frequency group
Pressing the FUNC key followed by the INT key alternates the frequency
groups from US mode to International mode then back to US mode. When
the power supply is turned on, the radio initially operates on Channel 16 in
the frequency group last selected.
When the frequency group is changed, the channel number remains the
same as was selected in the previous group, as long as that number is
present in the new group. If a channel number is absent in the destination
group, the new channel will be the previous number plus 1. When returning
to the previous frequency group, the channel returns to its original number
if the channel has not been changed. If the channel has been changed,
that number is retained when the frequency group is changed.
Refer to the examples in section 3.5.5 above, ignoring the references to the
Canadian frequency group.
3.5.7 Receiving on the Weather Channels
3.5.7 Receiving on the Weather Channels
3.5.7 Receiving on the Weather Channels
3.5.7 Receiving on the Weather Channels
3.5.7 Receiving on the Weather Channels
The Weather Channels consist of Channel 0 through Channel 9. To switch
between the Working Channel and the current Weather Channel, press the
FUNC key followed by the 6/WX key. While the Weather Channel is active,
the WX indicator is appears in the LCD display and the frequency group
indicator disappears.
If the channel number is changed while in the Weather mode, the new
channel number is stored in memory upon exiting Weather mode. When
the power is turned off, the last-used Weather Channel is retained for use
when the unit is powered back on.
To exit Weather Mode, press CLR, or FUNC followed by 6/WX.
Summary of Contents for RAY230E
