3-18
Operations
Note:
While using the Private Channel, changing the channel number or
pressing the CLR key returns operation to the Working Channel.
3.5.10 Priority Channel for RAY230
3.5.10 Priority Channel for RAY230
3.5.10 Priority Channel for RAY230
3.5.10 Priority Channel for RAY230
3.5.10 Priority Channel for RAY230
In the RAY230 US version, the Priority Channel operates on either Channel
16 or Channel 9. Pressing the 16/9 key during any operation except the
Distress Call switches to the Priority Channel. Pressing and holding the
16/9 key for 2 seconds alternates the Priority Channel between Channel 16
and Channel 9.
While using the Priority Channel, pressing the 16/9 key or the CLR key
returns operation to the Working Channel.
3.5.11 Priority Channel for RAY230E
3.5.11 Priority Channel for RAY230E
3.5.11 Priority Channel for RAY230E
3.5.11 Priority Channel for RAY230E
3.5.11 Priority Channel for RAY230E
In the RAY230E European version, the Priority Channel operates on
Channel 16. Pressing the 16 key at any state except the Distress Call shifts
operation to the Priority Channel. While using the Priority Channel, pressing
the 16 key or the CLR key returns operation to the Working Channel.
3.5.12 Multi-Call Operation (RAY230E only)
3.5.12 Multi-Call Operation (RAY230E only)
3.5.12 Multi-Call Operation (RAY230E only)
3.5.12 Multi-Call Operation (RAY230E only)
3.5.12 Multi-Call Operation (RAY230E only)
The Multi-Call function stores in memory up to 8 channels for quick access
for each of the 2 frequency groups. When the frequency group is changed,
the radio operates the channels registered in the previous Multi-Call.
Using Multi-Call
To start the Multi-Call operation, press the FUNC key followed by the 8/
M-CALL key. The Multi-Call channel used in the previous operation is
displayed. Use the Channel UP/DOWN key to increment/decrement
through the Multi-Call channels in memory. When exiting Multi-Call, the
last-used channel is stored to be used the next time Multi-Call starts.
Changing from the Multi-Call Channel to the Working Channel
During the Multi-Call operation you can return to the Working Channel by
again pressing FUNC followed by 8/M-CALL, by pressing the CLR key, or
by entering the channel number directly with the ENT key.
Summary of Contents for RAY230E
