3-49
Operations
3.5.30.2 NAVSTAT Operation
3.5.30.2 NAVSTAT Operation
3.5.30.2 NAVSTAT Operation
3.5.30.2 NAVSTAT Operation
3.5.30.2 NAVSTAT Operation
This operation indicates on the LCD display the position information that
has been input through NMEA or SeaTalk.
1) Press the FUNC key followed by the MENU key to initiate the Menu
operation.
2) Select NAVSTAT and press the ENT key. Scroll through the following
five items with the SQ UP/DOWN key, or wait as they are automatically
displayed at 3-second intervals in the following order:
1. Latitude
4. UTC Data (Y/M/D)
2. Longitude
5. Position source (GPS, LORAN, etc.)
3. UTC Time
This data is for viewing only and can not be altered. Manual position entry
is done in the DSC menu as outlined in Section 3.5.30.3.2
3 sec or
SQ UP/DOWN
3 sec or
SQ UP/DOWN
after 3 seconds elapse or pressing SQ UP/DOWN
3 sec or
SQ UP/DOWN
3 sec or
SQ UP/DOWN
To return to the main menu screen, again press FUNC followed by MENU.
To exit the Menu operation, press and hold the CLR key for 3 seconds.
Summary of Contents for RAY230E
