3-62
Operations
2) Press the ENT key. The 7-segment display shows
IC1
and the dot
matrix display indicates STATN 1.
3) Press the SQ UP/DOWN key scroll to STATN 2 and STATN 3. The
indication on the 7-segment display changes to
IC2
or
IC3
, respectively.
4) When the desired station name is displayed, press the ENT key to
submit.
5) To enter the new station name, use the numeric keys (0 through 9) to
input the associated alpha or numeric value (refer to section 3.2 Controls
and LCD Display). The currently selected location is indicated by the
flashing "–" character. After inputting the desired letter or numeral,
press the ENT key to submit the entry and proceed to the next place.
To go back by 1 digit, press the CLR key.
6) After entering all the desired characters, press the ENT key. The
message RING 1 is now displayed, prompting you to setup the ring
tone.
7) To change the tone, press the SQ UP/DOWN key to alternate between
RING 2, RING 3, and RING 4. As you scroll, the corresponding call tone
sounds from the handset.
8) When you hear the desired call tone, press the ENT key. The contents
of your changes are scrolled across the LCD.
9) If the contents are acceptable, press the ENT key to confirm. The
message CONT? Y is displayed.
10) Press the ENT key to register the changes.
To exit without making the changes, press the SQ UP/DOWN key until
DEL? N is displayed. Press the ENT key and operation returns to the mode
before the Menu operation began.
ENT
Summary of Contents for RAY230E
