Making a routine DSC call
You can use your product to make a routine DSC call to contact
saved in the phonebook.
1. Press and hold the
Menu DSC
button for 3 seconds.
The DSC menu is displayed.
2. Select
Individual
.
The Manual option and the phonebook list is displayed.
3. Select a phonebook entry to make a DSC call to that contact,
or
4. Select
MANUAL
to manually enter an MMSI number.
5. Use the
Channel Up
and
Channel Down
buttons to select a
channel to transmit on.
6. Select
OK
.
7. Select
SEND
.
The radio now waits for an acknowledgement to be received.
8. If an acknowledgement is received, press and hold the
PTT
button.
9. Speak your message.
10. Release the PTT button when you have completed your
message.
Receiving a routine individual call
When you receive an individual routine call the details are
displayed on-screen.
When an individual routine call is received.
1. Press the
RIGHT
soft button to cycle through the information
pages.
2. If you want to accept the call select
OK
at any time.
If auto channel change is turned on the radio will automatically
change to the request channel in 10 seconds.
3. Select
ACCEPT
to accept the call, or
4. Select
NOT ACCEPT
to reject the call.
i.
If you do not accept the call you can select a reason from
the list by selecting
OP
:
•
NO REASON
•
CONGESTION
•
BUSY
•
QUEUE
•
BARRED
•
NO OPERATOR
•
UNAVAILABLE
•
DISABLE
•
UNABLE CH
•
UNABLE MODE
ii. Select
OK
to confirm the reason.
5. Select
SEND
to send the acceptance or rejection of the call.
Confirmation of the acceptance or rejection of the call is
displayed on-screen. If you have accepted the call then the radio
will re-tune to the requested channel.
7.6 Group calls
Routine group calls can be made to groups of vessels sharing
the same Group MMSI numbers.
Routine group calls are made by selecting a group from the
Group menu, group calls are only received by stations sharing
the selected group MMSI number.
Refer to the
Group list
section for details on adding groups to
your radio.
Making a group routine call
To make a routine call to a group of stations use the group menu.
OK
HI
- - - - DSC MENU- - - -
ALL SHIP
GROUP
POS REQUES T
OK
HI
GROUP
CALL
MY GROUP I D
[
EXIT
]
BACK
OK
HI
GROUP
ROUTINE
SELECT CHA NNEL
CH:
0072
O
K
HI
GROUP
ROUTINE
TX COMPLETE
CH CHG TO: 0072
BACK
SEND
HI
GROUP
ROUTINE
SELECT CHA NNEL
CH:0072
OK
HI
GROUP
GROUP- A
GROUP- B
[
EMPTY-0 3
]
OK
HI
GROUP
ROUTINE
CALLING...
0072
0
0 0 1 A
0 0 2 8 A
0 0 8 8 A
CHANNEL NAME
INT
HI
82° 34.5N
123° 45.6W
AM01:23UT
D12822-1
1. Press and hold the
DSC Menu
button for 3 seconds.
The DSC menu is displayed.
2. Select
GROUP
.
3. Select
CALL
.
The group list is displayed.
4. Select a group you want to make a call to.
5. Use the
Channel Up
and
Channel Down
buttons to select a
channel you want to use for the communication.
6. Select
OK
.
7. Select
SEND
.
The radio now will now call the selected group.
8. When
TX COMPLETE
is displayed on-screen select
OK
.
9. Press and hold the
PTT
button.
10. Speak your message.
11. Release the
PTT
button when you have completed your
message.
Receiving a group call
If you receive a group call the details are displayed on-screen.
1. Press the
RIGHT
soft button to cycle through the information
pages.
2. Select
OK
at any time to accept the group call, or
3. Select
CANCEL
reject the call and resume normal operation.
4. If the caller has requested an acknowledgement then select
SEND
to send the acknowledgement.
With auto channel change turned on the radio will automatically
change to the requested channel after 10 seconds, otherwise
you will be request to confirm the change of channel.
Digital selective calling (DSC)
47
Summary of Contents for Ray260
