Raymarine Ray260 User Manual Download

Page: 8 / 94

Caution: Power supply protection

When installing this product ensure the power
source is adequately protected by means of a
suitably-rated fuse or automatic circuit breaker.

Caution: Perform regular radio
checks

Perform regular radio checks when using your
vessel, as recommended in radio training and
certification schemes and radio equipment rules
of use.

Caution: Ensure proper radio use

Under no circumstances should a DSC distress
alert be sent from your radio for test purposes.
Such action is a violation of rules of use for radio
equipment, and can result in heavy fines.

Caution: Cleaning

When cleaning this product:

• Do NOT wipe the display screen with a dry cloth,

as this could scratch the screen coating.

• Do NOT use abrasive, or acid or ammonia based

products.

• Do NOT use a jet wash.

General Information

Water ingress

Water ingress disclaimer

Although the waterproof rating capacity of this product meets
the stated IPX standard (refer to the product’s

Technical

Specification

), water intrusion and subsequent equipment

failure may occur if the product is subjected to commercial
high-pressure washing. Raymarine will not warrant products
subjected to high-pressure washing.

Disclaimer

Raymarine does not warrant that this product is error-free or that
it is compatible with products manufactured by any person or
entity other than Raymarine.

Raymarine is not responsible for damages or injuries caused by
your use or inability to use the product, by the interaction of the
product with products manufactured by others, or by errors in
information utilized by the product supplied by third parties.

FCC

Compliance Statement (Part 15.19)

This device complies with Part 15 of the FCC Rules. Operation
is subject to the following two conditions:

This device may not cause harmful interference.

This device must accept any interference received, including
interference that may cause undesired operation.

FCC Interference Statement (Part 15.105 (b))

This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules.

These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This
equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with

the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that
interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference
by one of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and
receiver.

Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.

Consult the dealer or an experienced radio / TV technician
for help.

Industry Canada

This device complies with Industry Canada License-exempt
RSS standard(s).
Operation is subject to the following two conditions:

This device may not cause interference; and

This device must accept any interference, including
interference that may cause undesired operation of the
device.

This Class B digital apparatus complies with Canadian
ICES-003.

Licensing

Prior to using this product please check your national
requirements for both operators and equipment licensing.

Station Licence

FCC station license requirement
An FCC Ship Radio Station License and Call Sign are not
required for most recreational vessels travelling in US waters.
However, you must obtain a license if your vessel travels to
foreign ports.
Ships that use MF/HF single side-band radio, satellite
communications, or telegraphy must be licensed by the FCC.
You can obtain a Station License by filing FCC Form 605, which
is available from the FCC website listed above.

Industry Canada

Industry Canada license requirement
You do not need a license to operate this product within
sovereign waters of Canada or the US. You will need a license
to operate this radio outside of Canada or the US. To obtain
Industry Canada licensing information, contact the nearest field
or regional office, or write:

Industry Canada Radio Regulatory Branch

Attention: DOSP

300 Slater Street

Ottawa, Ontario

Canada, KIA OC8

European licensing requirements

Regulations in some areas require that an Operator’s license is
obtained before operating a VHF radio. It is your responsibility
to determine whether a license is required in your area before
operating this equipment.

Additional information

The following additional information is required for completing a
license application in Canada and the US.

Industry Canada
certification number

4069B-RAY260 D

FCC ID

PJ5–RAY260

FCC Type accepted

Parts 2, 15 and 80

Output power

1 watt (low) and 25 watt (high)

Ray260