84
RC435 and RC435i Chartplotters
2. Use trackpad left/right to select
TRACK ENABLE
and press
ENTER
.
The
TRACK ENABLE
text changes to indicate
TRACK OFF
.
The vessel
’
s track is displayed on-screen with a line joining the points at
the selected interval.
Clearing the Current Track
The current track can be cleared from the screen.
➤
To clear the current track:
1. Select
CLEAR TRACK
.
The current track is cleared from the screen and memory.
2. If no further track points are to be placed, select
TRACK OFF
and press
ENTER
; the
TRACK OFF
text changes to indicate
TRACK ENABLE
.
SmartRoute
SmartRoute enables the latest track to be converted to a route.
➤
To convert a track to a route:
1. Select
MAKE INTO ROUTE
and press
ENTER
.
The current track is converted to a new route, with the most recently
placed track point as the start of the route. In other words, the track is
reversed.
If there is an unsaved current route on screen, the option to save the
route is given, see
Section 5.3, Working with Routes
.
2. Check the calculated route and that the route deviation from the orig-
inal, given in the warning box, is within navigable limits.
