1.
Power cable (straight) 2 m (6.6 ft) (part number:
A06049
).
2. Elbow (right angled) power cable 2 m (6.6 ft) (part number:
A06070
).
SeaTalkng ® connectors
SeaTalkng connectors are used to connect SeaTalkng devices to the
SeaTalkng backbone and to create and extend the backbone.
1.
5-Way connector (part number:
A06064
). Each connector block allows
connection of up to 3 SeaTalkng devices. Multiple connector blocks
can be ‘daisy chained’ together.
2. T-piece (part number:
A06028
). Each T-piece allows connection of one
SeaTalkng device. Multiple T-pieces can be ‘daisy chained’ together.
3.
Backbone extender (part number:
A06030
). Used to connect 2
backbone cables together.
4.
Inline terminator (part number:
A80001
). Used to connect a spur cable
and SeaTalkng device at the end of a backbone instead of a backbone
terminator.
5. Backbone terminator (part number:
A06031
). Terminators must be fitted
to both ends of the SeaTalkng backbone.
6. Spur blanking plug (part number:
A06032
). Used to cover unused spur
connections in 5–way blocks, T-piece connectors, or the SeaTalk to
SeaTalkng converter.
7.
Elbow (right angled) spur connector (part number:
A06077
). Used in
confined spaces where a straight spur cable will not fit.
SeaTalkng ® adaptors and adaptor cables
SeaTalkng adaptor cables are used to connect devices designed for different
CAN bus backbones (e.g.: SeaTalk or DeviceNet) to the SeaTalkng backbone.
1.
SeaTalk (3 pin) to SeaTalkng converter cable 1 m (3.3 ft) (part number:
A22164 / A06073
). Can be used to connect a SeaTalk device to a
SeaTalkng backbone via the SeaTalk to SeaTalkng converter, or to
connect a SeaTalkng product directly to a SeaTalk network.
2. SeaTalk (3 pin) to SeaTalkng adaptor cable 0.4 m (1.3 ft) (part number:
A06047
). Can be used to connect a SeaTalk device to a SeaTalkng
backbone via the SeaTalk to SeaTalkng converter, or to connect a
SeaTalkng product directly to a SeaTalk network.
3.
SeaTalk2 (5 pin) to SeaTalkng adaptor cable 0.4 m (1.3 ft) (part number:
A06048
). Used to connect SeaTalk2 devices or networks to a SeaTalkng
backbone.
4.
SeaTalkng to DeviceNet (female) adaptor cables connect NMEA 2000
devices that use a DeviceNet connector to the SeaTalkng backbone, or
connects SeaTalkng devices to an NMEA 2000 network. The following
cables are available:
• SeaTalkng to DeviceNet (female) adaptor cable 0.4 m (1.3 ft) (part
number:
A06045
).
• SeaTalkng to DeviceNet (female) adaptor cable 1 m (3.3 ft) (part
number:
A06075
).
65
Summary of Contents for RSW-Wired
