30
S1 Wheel and Tiller Pilots Operating Guide
2.5 User Calibration Options
The calibration information in this handbook relates to only those settings that
can be adjusted during normal operation (
USER CAL
). For information on all
available calibration settings, see SmartPilot Commissioning Guide.
Note: Many of the settings are sailboat specific and will only be displayed if your vessel
type is set to
SAILBOAT
.
How do I access User Calibration settings?
You can only access the calibration mode from Standby mode:
1. With the SmartPilot in Standby mode, press and hold the
standby
button for
2 seconds. The display will change to show
DISPLAY CAL
.
2. Press the
disp
button once, the display will now show
USER CAL
.
3. Press
auto
to enter User Calibration.
The first page of User Calibration will now be displayed.
4. To access other User Calibration pages, press
disp
to scroll down through the
items within that grouping:
5. When you reach an item you wish to adjust, use the
1, +1, 10
and
+10
but
tons
to change the value.
6. When you have made all the changes you want to make, press and hold
standby
for two seconds to exit calibration mode and save changes.
User Calibration pages
AutoTack angle
The AutoTack angle is the angle through which the boat will turn when you select
an automatic tack.
Gybe inhibit
With gybe inhibit on:
• you will be able to perform an AutoTack into the wind
• to prevent accidental gybes, the SmartPilot will prevent the boat from per
forming an AutoTack away from the wind
Screen Text
Options
AUTO TACK
40° to 125° in 1° steps
81283_1.book Page 30 Monday, October 2, 2006 2:03 PM
