8
SeaTalk Autopilot Hand-held Remote
SportPilot and SportPilot Plus
To connect the hand-held remote to the SportPilot you will need to
purchase an appropriate SeaTalk interface cable (D229). The red core
should also be fitted with a 5 A fuse.
Note: If you intend to locate the remote close to the SportPilot, the
SportPilot’s power cable has two additional wires (yellow and
screen) that you can use to connect the SeaTalk socket to the pilot.
However, a fused positive (+) connection from the power source to
the socket will be required.
Red
(+12 V)
Yellow
(SeaTalk
data)
Screen
(SeaTalk
ground)
Terminal
stripes
SportPilot or SportPilot Plus
12 V
Y S R
5 A
fuse
D5689-1
81197_1.book Page 8 Wednesday, August 1, 2001 11:19 AM
