2.3 System options
Your Raymarine Satellite TV system can be connected to one or
multiple IRDs, to offer the maximum choice of channels to different
cabins. This section describes the different combinations available
and the method of connecting each variant.
Ensure the power supply for the ACU is protected by either a
5 A quick-blow fuse or an equivalent automatic circuit breaker,
connected in-line on the positive (white with red tag) wire of the
power cable.
Note that for all variants, the
RF1
connector on the ACU must be
connected to the
RF1
connector on the antenna base plate.
2.4 Dual RF STV systems
Connecting a basic system
connects to
Television Monitor
(not supplied)
IRD (not supplied)
A
NT RF1
FUSE
NMEA
PC INTERFACE
RECEIVER
-
+
-
+
M
ADE IN KOREA
RF cable
Antenna base plate
ACU
DC 9 to30V
12 V or 24 V dc
power supply
D
1
1
7
3
3
-1
Brown with
red sleeve
Blue with
blue sleeve
Green/yellow with
white sleeve
Ground
Drain (screen)
RF 2
RF 1
1. Connect an RF cable from the
ANT RF1
connector on the ACU
to the
RF1
connector on the antenna base plate.
2. Connect an RF cable from the
RECEIVER
connector on the
ACU to either the
LNB
,
ANT
, or
Satellite In
connector on the
rear of the IRD.
Installation
17
