Mark the Antenna’s Parking Position
Referring to the supplied Mounting template, mark where
antenna is to be mounted onboard the ship (it must be a
flat surface), or on a separate “power tower” by drawing a
square of 14.4cm (5.7”)
Figure 09 : Raymarine STV33
Note:
If a “power tower” is not used to mount the antenna,
separate cable shocks and waterproofing measures must
be taken to protect the RF connector from being exposed to
sea water and external shocks. An exposed cable may cause
electric shock and cause serious damage to the equipment.
14.4cm (5.7”)
14.4cm (5.
7”)
