You may find it useful to experiment with this option to find the best
setting to suit your needs.
Reversing the video polarity
To reverse the polarity of the video image follow the steps below.
Using the JCU:
1. Press
MENU
.
2. Select
Video Setup
.
3. Select
Set Reverse Video
4. Select
MENU
to cancel the on-screen menu.
Thermal and visible-light operation
“Dual payload” thermal cameras are equipped with 2 cameras — a
thermal imaging (infrared) camera and a visible-light camera.
Thermal camera
— provides
night-time imagery, based
on temperature differences
between objects. Thermal
imaging produces a clear
image even in total darkness.
Visible-light camera
—
provides black and white (or
greyscale) imagery during the
day and in low-light conditions.
Helps to improve navigational
abilities in low-light conditions;
for example during twilight
hours when operating along
intercoastal waterways and
near harbor entrances.
Note:
The T470SC and
T473SC have a color
camera and continuous
zoom lens.
Thermal camera rear view mode
The rear view mode flips the video image horizontally, providing a
“mirror image”.
This is useful for example in instances where the camera is
rear-facing and you are viewing the image on a forward-facing
monitor.
Switching the camera to rearview mode
To switch the camera to rear view mode follow the steps below.
Using the JCU
1. Press
MENU
.
2. Select
System Setup
.
3. Select
Enable Rearview Mode
.
When enabled the option is changed to
Disable Rearview
Mode
, selecting this will revert back to normal view.
4. Press
MENU
to cancel the on-screen menu.
6.6 System reset
Resetting the JCU
Occasionally it may be necessary to reset the JCU, to do this you
can either power cycle the JCU or follow the steps below:
1. Press and hold the
SCENE
,
COLOR
and
HOME
buttons for
1 second.
Resetting the thermal camera
Use this procedure to reset the thermal camera. This will realign the
home and stow positions, for example if they become misaligned
due to heavy weather.
1. Press the
HOME
button 4 times successively to reset the
camera.
Restoring factory defaults
Use this procedure to reset the camera to its factory default settings.
With the camera setup menu displayed:
1. Select the
About/Help
menu.
2. Select
Restore Factory Defaults
from the available options.
34
T-Series
Summary of Contents for T303
