TH-Series
User reference
3—Operating Your TH-Series Camera
81333-1
7
3–3
TH-Series Power Management
Your TH-Series camera is equipped with a power management
system that provides up to five hours of continuous operation.
When left in the Off state the battery will hold a charge
for up to two months. To make the best use of the camera it is
important to understand the basic power states of the camera.
•
When the camera is turned on from the Off state, it takes
about four seconds to become operational. During the Bootup
process, The splash screen is shown and then the
software version is displayed briefly. Pressing the Power
button will toggle the camera between On and Off.
•
The camera shuts down after about five minutes if no
buttons are pushed.
Auto shutdown 30s
, is shown in the
display, and after counting down for 30 seconds the
camera will shutdown.
3–4
Buttons and Controls
Power Button
Turn the camera On and Off.
Display Brightness Button
Use this button to cycle through the five levels of
display brightness. Each press of the button
advances to the next level of brightness.
Camera
State
How do you know?
Off
The display is off, the camera buttons are dark, and the
LED Tasklight comes on when the Brightness button is
pressed.
On
The display is on, the camera buttons are back-lighted,
and the LED Tasklight is disabled.
