4
Connect to the gas bottle
This Rayno Grill is only suitable for low pressure LPG
and must be used with the low-pressure regulator and
flexible hose. To operate this grill, you need a commercially available 3 - 6 kg bottle
of LPG
Storage of the Rayno Grill
The Rayno Grill may only be stored indoors if the gas cylinder has been removed and
should be covered with a protective hood and stored in a dry and dust-free
environment.
Connection to the Rayno Grill
Place the gas bottle next to the grill.
Caution!
Before the gas bottle is connected to the Rayno Grill,
it must be ensured that there is no dirt in the heads of the gas cylinder and the
regulator.
Connect the pressure regulator hand-tight to the gas cylinder valve.
Follow the instructions that came with the Regulator.
Caution!
Before each use, check all connections for gas leaks!
Always perform the test with soapy water. Never one
Use an open flame to find leaks.
Preparation
-Take the Grill Grid out of the grill.
- Do not lean over the grill.
- Open the gas bottle valve and hold the flame of the “BBQ long reach lighter” directly
under the burner
Caution!
The grill reaches within a few seconds a temperature of over 400 ° C and the
operating temperature of approx. 800 ° C in 5 - 7 minutes.
