background image

31

LOCK

LIGHT

CLOSED

OPEN

ACCESSORIES 

374RGD

370LM

395LM

3708CH

1702LM

Outside Quick Release:

Required for a garage with NO access
door. Enables homeowner to open
garage door manually from outside by
disengaging trolley.

8 Foot (2.4 m) Complete Rail: 

To allow an 8 foot (2.4 m) door to open
fully.

Remote Light Control:

Enables homeowner to turn on a lamp,
television or other appliance from their
car with their garage door opener remote
or from anywhere in their home with an
additional Raynor 

S

AFETY

S

IGNAL

TM

remote.

Designer Burled Walnut 3-Button
Remote Control with Security

®

:

Includes visor clip.

4-Button S

AFETY

S

IGNAL

™ Remote

Control:

Includes visor clip.

10 Foot (3 m) Complete Rail: 

To allow a 10 foot (3 m) door to open
fully.

Multi-Function Door Control Panel:

Provides a lock feature which prevents
operation of garage door opener from
portable remotes and a light feature for
constant light.

3710CH

373W

Wireless Keyless Entry with
Security

®

:

Enables homeowner to operate
garage door opener from outside by
entering a password on a specially
designed keyboard. Also can add a
temporary password for visitors or
service persons. This temporary
password can be limited to a
programmable number of hours or
entries.

78LM

3-Button Mini-Remote Control with
Security

®

:

With key ring and fastening strip.

3707CH

7 Foot (2.1 m) Complete Rail: 

To allow a 7 foot (2.1 m) door to open
fully.

372RGD

371RGD

Single-Button S

AFETY

S

IGNAL

™ Remote

Control:

Includes visor clip.

2-Button S

AFETY

S

IGNAL

Remote Control:

Includes visor clip.

2 & 3 Door Multi-Function Wall
Control:

Ideal for homes with up to three garage
doors. Combine up to three controls
into one wall control panel for a neat
compact appearance. Enhanced
functions include Lock Feature to lock
out outside radio signals while you are
away from home and turn opener lights
on or off from the control panel.

376LG

Garage Door Monitor:

Security for the largest door of your
home!

Tells you if your garage door is open or
closed. Monitors up to 4 garage doors by
adding additional sensor modules.

915LM

Garage Door Monitor Sensor:

Additional accessory sensor for homes
with multiple garage doors.

916LM

902LM/903LM

Summary of Contents for 3595RGD 3/4 HP

































Reviews: