background image

9

LIMITED WARRANTY 

RAYPAK INDIRECT POOL HEATERS  

Models: RP-045, RP-075, RP-125, RP-185, RP-245, RP-305, RP-495, RP-995, 

B Ti-180, B Ti-300, B Ti-500 

SCOPE OF WARRANTY 

EFFECTIVE DATE 

APPLICABLE WARRANTY PERIOD 

LABOR AND SHIPPING COSTS 

WARRANTY EXCLUSIONS 

This Limited Warranty does 

NOT 

apply; 

1.  if the product has been moved from its original place of installation, or if the original 

owner no longer owns the property where the original installation was made; 

2.  if the product is not properly installed with a pool or spa by a qualified licensed installer in 

accordance with applicable local codes and ordinances, good trade practices, and the 

manufacturer’s installation instructions; 

3.  if the rating plate(s) or serial number(s) are altered or removed; 

4.  if the product is modified in any way, or non-factory authorized accessories or other 

components are used in conjunction with the product; 

Raypak, Inc. (Raypak) warrants to the original owner that the above model HEATER, when

installed in the contiguous 48 states with a pool or spa by a properly licensed installer will be free

from defects in materials and workmanship under normal use and service for the Applicable

Warranty Period. In accordance with the terms of this Limited Warranty, Raypak will, at its option,

repair or furnish a replacement for any defective part of the HEATER if it fails in normal use and

service during the Applicable Warranty Period. The repair or replacement will be warranted for

only the unexpired portion of the original Applicable Warranty Period.

The Effective Date of this Limited Warranty is the date of original installation if properly

documented; if you are not able to provide documentary proof of the date of original installation,

the Effective Date will be the date of manufacture plus 30 days.

If the HEATER is installed with a pool or spa, the Applicable Warranty Period is one (1) year from

the Effective Date, parts and labor, for the HEATER and component parts.

This Limited Warranty covers the normal cost of Raypak authorized labor repairs or replacements

covered by this Limited Warranty which are performed by a Raypak designated service provider

during the Applicable Warranty Period. Do not attempt to repair or replace any in-warranty

product or component part(s) without prior authorization from Raypak. This Limited Warranty

does not cover any travel time or other labor costs. This Limited Warranty does not cover any

shipping costs to and from Raypak's designated service provider or to and from the installation

site. All of the foregoing costs and expenses are your responsibility.

5.  to conditions including damage, malfunctions or failures resulting from failure to properly

 

install, operate or maintain the product in accordance with the manufacturer's

 

instructions;

6.   to conditions including damage, malfunctions or failures from abuse, act of nature,

 accident, fire, flood, freeze, lightning or the like;

7.   to conditions including damage, malfunctions or failures resulting from or due to

 connected system control devices;

8.   to conditions including performance problems caused by improper sizing of the heater;

9.   to conditions including damage, malfunctions or failures resulting from any alteration,

 

including the use of any attachment, including any energy saving device, not authorized

 

by the manufacturer;

Summary of Contents for 013476












Reviews: