10
X-3 RESTRAINT BRACKET KIT
NOTE:
The X-3 Restraint Bracket Kit can be used stand-
alone to securely anchor a single Hi Delta or Delta
LTD appliance to structure. Anchor size and quantity
determination is site specific, by others
Item
Description
Qty
P/N for Sizes
302-902
399-899
(008136)
P/N for Sizes
992-2342
989-2339
(008147)
Location
4
Washer, Lock, 3/8"
8
550136
Restraint Bracket
Connections
7
Spacer
8
550730
8
Bracket
4
401665
9
Restraint Bracket
4
074522
067512
10
Screw, Hex Head, 3/8"-16 UNC x 2.0"
8
550267
ASSEMBLY
1. Place one foot at each corner of the boiler.
2. Place one “L” shaped mounting bracket under the
boiler at each corner as shown in Figure 13.
3. Insert one 2” bolt and washer through the hole on
restraint bracket, making sure to place a spacer
between the restraint bracket and the boiler cabinet.
4. Start to thread bolt into mounting bracket as shown in
Figure 13, tighten evenly.
5. Repeat the previous procedure on all four corners of
the boiler as shown in Figure 13.
6. Once all 4 feet have been installed you can mark the
floor for drilling anchor holes.
7. Two bolts per foot are recommended for anchoring.
8. The mounting brackets must be installed as shown
in Figure 13.
