5
4
www.raysonicaudio.com
www.raysonicaudio.com
Power tube bias information
1
17
16
18
14
15
13
12
11
10
9
8
7
6
5
4
3
2
Remote Volume Control
Remote control layout
LED ON/OFF
VOL
VOL
CD SERIES
(1)Mute button (MUTE)
(2)A-B button for repeated playback of a specified passage(A-B):
During normal playback:
a. Press this button once at the starting point (A) of the passage you want to
repeat. If do not press the button again to mark the stopping point(B) before the
next track starts, the starting point A will be cleared during the track change.
b. Press this key again at the end of the passage(B) you want to repeat, the
designated passage A-B will be played repeatedly.
(3)Program button (P R O G)
When the system is at stop stage:
a. Press this button once to display
P00:00
(play order track number).
maximum 20 tracks can be programmed.
b. Press numeric button to select tracks.
c. Press play button to activate program play (using fast forward, fast reverse
button to select playback order.)
Rear Panel
Remote Volume Control
(4)Screen display mode.(DIMMER)
(5)Introduction(INFO)
When the system is at stop stage:
a. Press this button once : the system will scan the disc and play back each track
for 15 seconds. After all tracks are played, the system will stop and display the
total track number and time for the entire disc.
b. Press this key again: the system will return to the normal play back mode.
(6)Random Playback button(RANDOM)
When the system is at stop mode:
a. Press this button once :the system will enter random play back mode.
After all tracks are played once ,the system will stop and display the total
track number and play back time for the entire disc.
b. Press this button again: the system will return to normal play back.
(7)Track time and surplus time button(TIME)
(8)LED ON/OFF
(9)Repeat button (REPEAT)
During normal playback:
a. Press this button once: the system will play the current track repeatedly.
b. Press this button again: the system will play all tracks repeatedly.
(10)Numeric button (0-9,totally ten buttons)
Press 1-9 buttons to select a specific sound track you want to play. For the track
number bigger than 10, press the two button for the track number.
(11)Fast backward button
a. When press this button during normal playback ,the system will play the
track reversely at a speed twice faster than the normal. Once the track is
finished, the system will play the previous track normally.(Press this button
when the system is playing the first track, the system will stop and display
total track number and playback time for the entire disc.)
b. When the system is at programming stage, press this key to program the
sequence of the tracks.
(12)Fast forward button
a. During normal playback, press and hold this button, the system will play at a
speed twice faster than the normal. Once the track is finished, the system will
play the next track normally.(Press this button when the system is playing the
last track, the system will stop and display the total track number and
playback time for the entire disc.)
Summary of Contents for CD228
Page 2: ......
