- 10 -
4.6 Network cable
If needed, the network cable should be made like this diagram. But the network
cable between battery and Inverter should be made following the definition of
Inverter. If available, use a LAN cable tester to check whether the cable is faulty.
4.7 Storage
If the battery is not to be installed immediately, or removed from operation and
needs to be stored for a long period, please choose an appropriate location to
store it. Instructions for storage are:
Do not stack more than 8 battery boxes.
The temperature of battery stored recommended in the range of -20°C to 25°
C.
Do not expose to water
The ESS box should be upright and not stacked upside down when storing the ESS
box.
If the ESS needs to be stored over 3 months, the DC circuit of battery suggests to
be disconnected. Otherwise, the battery would discharge at a minimum rate and
capacity degrades depended on storage time, the battery self-consumption is less
than 5w. And, if the battery stored over 6 months, it is suggested to connect the
battery with inverter and commission the system.
5 Battery Installation
5.1 Package items
These items are included in the package.
