background image

Raytech USA, Inc.  All rights reserved

Ver. 1.13

20

WARRANTY

12

0

RAYTECH USA, Inc. warrants to the original purchaser of any new TR-1 or TR-1P, that it will be free from
defects in material and workmanship under normal use and service for a period of 5 years from the original date of
shipment. This 5-year warranty is provided at no cost to the end user, for the products covered under this warranty
if the products are returned on each calendar year from the original date of shipment, prepaid, to Raytech USA, for
system evaluation.
The obligation of RAYTECH USA, Inc. under this warranty is limited, in its exclusive option, to repair, replace, or
issue credit for parts or materials which prove to be defective, and is subject to the purchaser's compliance with the
RAYTECH USA, Inc. warranty claim procedure as set forth within this manual.
This warranty covers only those parts and/or material deemed to be defective resulting from the

manufacturer’s

workmanship. The liability of RAYTECH USA, Inc. shall be limited to the repair, replacement, or issuance of
credit for parts deemed defective within the meaning of this warranty. Costs for labor or other expenses that may
have occurred incidental to the inspection, repair, replacement, or issuance of credit for such parts and/or materials
shall be the sole responsibility of purchaser.  This warranty shall not apply to any accessories, parts, or materials
not manufactured or supplied by RAYTECH USA, Inc.

Equipment must be returned prepaid with a Return Material Authorization (RMA) to:

RAYTECH USA, Inc.

or

RAYTECH GmbH

118 S. 2

nd

Street

Oberebenstrasse 11

Perkasie, PA 18944

CH-5620 Bremgarten

USA

Switzerland

Tel. 1 267 404 2676

Tel. + 41 56 640 0670

Fax. 1 267 404 2685

Fax. + 41 56 640 0674

www.RaytechUSA.com

www.Raytech.ch

LIMITATION OF WARRANTY

The foregoing warranty shall not apply to defects resulting from improper and unauthorized modifications or
misuse and abuse of the product, negligence, alteration, modification, faulty installation by the customer,

customer’s agents or employees. Attempted or actual dismantling, disassembling, service or repair by any per

son,

firm, or corporation not specifically authorized in writing by RAYTECH USA, Inc.
Defects caused by or due to handling by carrier, or incurred during shipment, trans-shipment, or other move.
Inadequate maintenance by the customer, second source supplied software or interfacing, operation outside the
environmental limits, or improper site preparation.

Exclusive remedies provided herein are the customer’s sole and exclusive remedies.

RAYTECH USA, Inc. shall not be liable for any damages resulting from the use of this equipment whether direct,
indirect, special, incidental, or consequential damages, or whether based on contract, tort, or any other legal theory.

NO OTHER WARRANTY IS EXPRESSED OR IMPLIED.

Summary of Contents for TR-1






















Reviews: