RSSD AR
-
727H MANUAL 61
DURESS CODE
DURESS CODE
DURESS CODE
DURESS CODE
Enter Programming Mode
or
Use F1 or F2 to scroll to
and press
Use F1 or F2 to scroll to
and press
The Display will show:-
Enter Number required.
Duress Code only works in Modes 4 and 8 and Networking.
Access Mode needs to be set to 2: or PIN or 3: & PIN for this
function to work properly.
The Display will show
For this function to work properly, the Serial Port needs to be enabled for
Duress Code. For further details refer to Setting Serial Port Output on page
71 of this manual.
Duress Code Settings
*123456#
*MASTER CODE#
4. Parameters (2)
8. Duress Code
#
#
Succeeded!
~
Input 4 Digit No
Range: 0001 9999
Data: 4321
NOTICE
NOTICE
NOTICE
NOTICE
