Installation and Service manual
Compass STD 22
Compass STD 22 Compact
II
Edition: Feb. 17, 2006
3646/110--233.DOC010302
3
Preparing to install the STD 22 Gyro Compass
73
. . . . . . . . . . . . .
3.1
STD 22 Compass – Scope of Supply
73
. . . . . . . . . . . . . . . . . . . . . . . . .
3.1.1
General information concerning installation
of the STD 22 Compass
74
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3.2
Creating cable connections
75
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3.2.1
General information concerning on-board wiring
75
. . . . . . . . . . . . . . .
3.2.1.1
General information about creating an earth connection
78
. . . . . . . .
3.3
Installing the compass and putting it into operation
79
. . . . . . . . . . . . .
3.3.1
Remove the transportation support with outer sphere,
supporting liquid and distilled water
79
. . . . . . . . . . . . . . . . . . . . . . . . . .
3.3.1.1
Assembling the compass enclosure
80
. . . . . . . . . . . . . . . . . . . . . . . . . .
3.3.1.2
Installation of the gyrosphere
83
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3.3.1.3
Filling with distilled water and supporting liquid
85
. . . . . . . . . . . . . . . .
3.3.1.4
Inserting the outer sphere in the compass enclosure
87
. . . . . . . . . . .
3.4
Creating cable connections and plug connections
89
. . . . . . . . . . . . . .
3.4.1
Overview of plug connections and fuses on PCB‘s
89
. . . . . . . . . . . . .
3.4.2
Creating a cable connection from
STD 22 Compass
→
Distribution Unit
91
. . . . . . . . . . . . . . . . . . . . . . . .
3.4.2.1
Connecting to the power supply (Distribution Unit)
92
. . . . . . . . . . . . .
3.4.2.2
Connecting the CAN bus plug
93
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3.4.2.3
Setting the jumpers for the CAN bus
94
. . . . . . . . . . . . . . . . . . . . . . . . .
3.4.2.4
Switching the termination resistors for the CAN bus (E10 only)
95
. .
3.4.2.5
Connecting the compass to earth
96
. . . . . . . . . . . . . . . . . . . . . . . . . . . .
3.4.3
Switching on, settling and adjustment
97
. . . . . . . . . . . . . . . . . . . . . . . .
3.4.3.1
Checks on the compass
97
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3.4.3.2
Switching on the compass
99
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3.4.3.3
Setting the compass zero (reference course)
101
. . . . . . . . . . . . . . . . . .
3.4.3.4
Reading the alignment error
103
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3.4.3.5
Setting the CAN bus address
104
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3.4.3.6
Adjustments of essential operating modes
105
. . . . . . . . . . . . . . . . . . . .
3.4.3.7
Function check on externally connected course receivers,
Function check of RoT
112
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4
Fuses, jumper, LED‘s, buttons and plugs
115
. . . . . . . . . . . . . . . . . . .
5
DIP SWITCH settings
117
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
5.1
Overview of functions of all DIP switch settings
118
. . . . . . . . . . . . . . . .
5.1.1
Adjustments of parameters (in ascending order of function)
122
. . . . .
5.1.2
Adjustments of parameters
(in ascending order of their appearance)
124
. . . . . . . . . . . . . . . . . . . . . .
5.1.3
7 segment displays and their meaning
126
. . . . . . . . . . . . . . . . . . . . . . . .
5.1.4
Functional description of DIP switch settings (for general use)
127
. . .
5.1.5
Functional description of DIP switch settings (SEC)
163
. . . . . . . . . . . .
6
Tasks to be performed regularly
183
. . . . . . . . . . . . . . . . . . . . . . . . . . .
6.1
Changing the supporting liquid and distilled water
183
. . . . . . . . . . . . . .
6.1.1
Removing the outer sphere from the compass enclosure
183
. . . . . . .
6.1.1.1
Draining the supporting liquid and distilled water
185
. . . . . . . . . . . . . . .
