Installation and Service manual
Compass STD 22
76
Edition: May 20, 2005
3646/110--233.DOC010302
-- Push the components of the screw fastening over the cable.
It is essential to follow the sequence (as shown in Figure 38).
-- Check the cone and the mating piece of the earthing insert for corrosion and
if necessary remove corrosion with an emery cloth.
-- Push the mating piece of the earthing insert to the end of the cable sheath.
-- Push the cone inside the screening and against the mating piece. Ensure
that the screening is evenly distributed over the cone (see Figure 38).
Wall and DIN cap
Screening
Earthing insert
-- Cone
-- Counter part
Sealing
+ strain relief
Washer
Counter nut
Figure 38
: Creating the cable connection
