Handling, Serv & Maint
Section 8
Model A36
8-25
To be safe, treat the magnetos as hot
whenever a switch lead is disconnected at
any point; they do not have an internal
automatic grounding device. The magnetos
can be grounded by replacing the switch
lead at the noise filter capacitor with a wire
which is grounded to the engine case. Oth-
erwise, all spark plug leads should be dis-
connected or the cable outlet plate on the
rear of the magneto should be removed.
CLEANING
EXTERIOR PAINTED SURFACES
Polyester urethane finishes undergo a cur-
ing process for a period of 30 days after
application. Wash uncured painted sur-
faces with a mild non-detergent soap (MILD
detergents can be used on urethane fin-
ishes) and cold or lukewarm water only.
Use soft cloths, keeping them free of dirt
and grime. Any rubbing of the surface
should be done gently and held to a mini-
mum to avoid damaging the paint film.
Rinse thoroughly with clear water. Stubborn
oil or soot deposits may be removed with
automotive tar removers.
January, 2006
Summary of Contents for Beech Bonanza A36
Page 157: ...Beech Bonanza A36 Raytheon Aircraft THIS PAGE INTENTIONALLY LEFT BLANK 6 2 November 2002...
Page 184: ...Raytheon Aircraft November 2002 Beech Bonanza A36 Section VII w z in t w en w 0 w A 7 9...
Page 336: ...FAA Approved Issued April 1991 P N 36 590002 55 THREE VIEW 3 of 18...
Page 427: ...THIS PAGE INTENTIONALL V LEFT BLANK 22 of 22 FAA Approved Issued March 2003 PIN 36 590002 0063...