OPERATION
NautoPilot 5000 Series
120
4002.DOC010102
Edition: September 2014
4.4.6
Lost position value in ”Course Control” mode
The Course Control mode is executed for at least 2 minutes and the top bar (yellowish
orange) displays ”Dead Reckoning no Position” during this time.
If no valid position is available after 2 minutes, the ”Course Control” mode is stopped
and a switchover to ”Heading Control” mode is performed (an appropriate message will
be displayed at the top bar).
If a valid position is available, but a position jump is detected, a switchover to ”Heading
Control” mode is performed to prevent an unwanted rudder movement.
If a valid position is available without a position jump, the ”Course Control” mode
continues, however, all messages (warnings) must be acknowledged.
4.5
Track Control
(see also section 1.4.5)
The ”Track Control” mode can be started from ”Heading Control” mode only.
All necessary data for a “Track Control” are generated from a connected track planing
system.
Data for the control function of the Autopilot can be adjusted.
