OPERATION
AUTOPILOT
NautoPilot 5000 Series
153
4002.DOC010102
Edition: September 2014
Message
Possible cause
Remedy
No Position
----------------------------------------------
No Position
Wrong operator input.
No position data avail-
able.
Attempt to switch to
Course control mode
and there is no position
data.
Attempt to switch to
Track control mode and
there is no position data.
Check operator’s input/
adjustment.
(see also section
2.3.5.5).
Check position sen-
sor(s).
Check position sen-
sor(s).
Check position sen-
sor(s).
No Position Monitor
DR not available
----------------------------------------------
No Position Mon.
Because of a drop out of
a speed sensor a Dead
Reckoning position can-
not be calculated.
Therefore a monitoring
of selected position sen-
sor is no longer possible.
Check speed sensor(s).
Input manual speed (if
known),
see section 2.3.6.2.
Select another mode
(where no position moni-
toring is necessary) for
example:
Heading Control mode,
see section 4.3.3
or
select manual in Course
Control mode,
see section 4.4.4.