OPERATION
NautoPilot 5000 Series
IV
4002.DOC010102
Edition: September 2014
Figure 1:
NautoPilot 5000 Series, Operator Unit
1
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Figure 2:
Standalone application for the NautoPilot 5000 Series
4
. . . . . . . . . . . . . . . . . . . . . . .
Figure 3:
Integrated application of NautoPilot 5000 Series
5
. . . . . . . . . . . . . . . . . . . . . . . . . . . .
Figure 4:
Course Trim angle
11
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Figure 5:
Heading Control after manual set heading adjustment
17
. . . . . . . . . . . . . . . . . . . . . . .
Figure 6:
Principle of Course Control versus Heading Control
18
. . . . . . . . . . . . . . . . . . . . . . . . .
Figure 7:
Explanations for a heading change in Course Control
19
. . . . . . . . . . . . . . . . . . . . . . . .
Figure 8:
Principle of Course Control display
20
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Figure 9:
Course Control after manual set heading adjustment
21
. . . . . . . . . . . . . . . . . . . . . . . .
Figure 10:
Principle of Track Control
24
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Figure 11:
Example for GO--TO--WAYPOINT Manoeuvre
for NP5100, NP5300 and NP5400
28
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Figure 12:
Example of Five Different GO--TO--WAYPOINT Manoeuvres depending on
the initial heading
28
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Figure 13:
Geometrical Requirements of GO--TO--WAYPOINT Manoeuvres
29
. . . . . . . . . . . . . .
Figure 14:
Changing over to Track Control -- on transmitting a FROM--WPT by
the ECDIS
32
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Figure 15:
Procedure of the Track Change Manoeuvre (Example)
33
. . . . . . . . . . . . . . . . . . . . . .
Figure 16:
Extreme Case Example of a Track Change Manoeuvre
35
. . . . . . . . . . . . . . . . . . . . . .
Figure 17:
Changing TO--WPT and NEXT--WPT without Interrupting Track Control
36
. . . . . . . .
Figure 18:
Intended RETURN--TO--TRACK manoeuvre Impossible with the Ship
too Close to the TO--WPT
43
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Figure 19:
Track Control impossible with the Distance to the Track too large
43
. . . . . . . . . . . . .
Figure 20:
NautoPilot Operator Unit (operation elements)
47
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Figure 21:
Structure to adjust parameters and values
49
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Figure 22:
First display (after switching ON the NautoPilot Operator Unit)
50
. . . . . . . . . . . . . . .
Figure 23:
Tendency bar
53
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Figure 24:
First display (after switching ON the NautoPilot Operator Unit in night mode,
black/white)
54
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Figure 25:
First Display (heading changes with RoT is selected).
55
. . . . . . . . . . . . . . . . . . . . . . .
Figure 26:
First Display (Eco/Prec switchover)
56
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Figure 27:
Switching to display selection
57
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Figure 28:
Displays for ”HDG /Rudder Plot”
58
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Figure 29:
Example of a ”SET” request after a parameter has been changed
58
. . . . . . . . . . . . .
Figure 30:
Displays for “Track Data”
61
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Figure 31:
Example of a request to press ”SET” after a parameter has been changed
62
. . . . .
Figure 32:
Display for “NP 5000 Actual Rudder” with one and two rudders
64
. . . . . . . . . . . . . . .
Figure 33:
Displays for “Acceleration Monitor”
66
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Figure 34:
Example of a request to press ”SET” after a parameter has been changed
68
. . . . .
Figure 35:
Display for the ”Position Monitoring” function (no limit exceeded)
71
. . . . . . . . . . . . . .
