Chapter 4: Additional Basic Functions
39
4.4 Displaying Navigation Information, Using DISPLAY
Although you can use your RayChart 620 with the whole screen
devoted to the chart, you also have the option of displaying a wide
range of navigational data.
This information is normally presented in one or two windows, with the
chart displayed in the rest of the screen.
The display type is controlled using the DISPLAY dedicated key. When
you press the DISPLAY key, the following prompt is displayed, with the
last-used option highlighted:
D3839-1
Press DISPLAY to toggle between the two settings with their
associated windows and soft key functions:
CHART
Displays the chart type you used last – full or window.
The soft keys allow you to choose between a full screen
chart, and one with the current window(s) configuration.
In windowed mode, you can also change the window
set up.
NAV
Displays the chart and switches on the last-used
navigation steering insert to the bottom right of the
screen.
The soft key labels disappear after 7 seconds if you do not make a
selection.
The different display options are described in more detail in the
following sections.
Chart
The Chart display soft keys allow you to select either a full screen or one
with one or two windows. When you use the DISPLAY key to select the
chart, the display you used last (full or windowed) is shown.
The windows that are available for display include those you have
customized as part of your setup procedure, as described in
Section 6.3.
Summary of Contents for RayChart 620
