56
RayChart 620
3. When the required waypoint name is displayed, press ENTER.
The chart is repositioned, with the waypoint displayed in the centre
of the screen. The waypoint data is shown in the object data box.
5.6 Displaying and Printing the Log
A log entry is created every 30 minutes and the log keeps data from the
last 24 hours.
➤
To display the log, select the LOG option from the EDIT menu.
The list shows the date and time of each log entry, plus the following
details for the highlighted entry:
• Vessel’s position
• Course Made Good (CMG) and Distance Made Good (DMG) since
the previous log entry.
Use the trackpad to scroll up or down the list.
➤
To print the log, check that your printer is connected and on-line, and
press the PRINT soft key.
Note: You cannot edit the log.
5.7 Printing
The RayChart 620 provides a Print function that allows you to print any
display.
Before using the option, check that your printer is connected and
on-line, and that you have set the baud rate correctly using the System
Set Up menu (see Chapter 6).
➤
To print a screen, press and hold the DISPLAY key for 5 seconds. At
the end of this time, the RayChart beeps 3 times, the cursor disappears,
and the display information is sent to the printer.
Summary of Contents for RayChart 620
