Safety
1–4
F232048
To provide personal safety and keep the
machine in proper working order, follow
all operation and safety procedures
presented in this manual. If questions
regarding safety arise, contact the
factory immediately.
Use factory-authorized spare parts to
avoid safety hazards.
Operator Safety
To ensure the safety of machine
operators, the following maintenance
checks must be performed daily:
1. Prior to operating the machine,
verify that all warning signs are
present and legible. Missing or
illegible signs must be replaced
immediately. Make certain that
spares are available.
2. Check door interlock before starting
operation of the machine:
a. Attempt to start the machine
with the door open. The machine
should not start with the
door open.
b. Close the door without locking it
and attempt to start the machine.
The machine should not start with
the door unlocked.
c. Close and lock the door and start a
cycle. Attempt to open the door
while the cycle is in progress. The
door should not open.
If the door lock and interlock are
not functioning properly, call a
service technician.
3. Do not attempt to operate the
machine if any of the following
conditions are present:
a. The door does not remain securely
locked during the entire cycle.
b. Excessively high water level
is evident.
c. Machine is not connected to a
properly grounded circuit.
Do not bypass any safety devices in
the machine.
Safe Operating Environment
Safe operation requires an appropriate
operating environment for both the
operator and the machine. If questions
regarding safety arise, contact the
factory immediately.
Environmental Conditions
•
Ambient Temperature
. Water in the
machine will freeze at temperatures
of 32° F or below.
NEVER insert hands or objects into basket
until it has completely stopped. Doing so
could result in serious injury.
SW012
WARNING
