V1.1
Shanghai Empower Technologies Co., Ltd. © Copy Right
www.empower.cn
BM114 SERIES 6KW Laser Cutting Head User Manual
15 | 11
2.
Select J axis for detection, open loop point movement control. Move or detect the encoder in the
(-14mm~+9mm) stroke to determine the encoder direction.
3.
Save the parameters and enter the interface
3.2.3
Interface Operation
1. Inch J axi, check up if the action is normal(distance to “pitch” and direction), 0 scale moves up to J+.
2. Slow moving the J axis so that it meets the positive and negative limit, check whether the direction, the
signal is normal or not.
3. Click zero returning icon, J axis move to negative direction and return zero again when touches negative
limit, at the same time ,the position of zero point coincides with zero foal position and the zero returning
is finished.
Figure 4.6 — Platform configuration tools
Figure 4.7— Operation interface
