Razberi Monitor™
98
Complete the form, and an email will be sent to you with your credentials and
instructions to verify your account.
2.
On your Razberi System, open Razberi Monitor by clicking on the icon, navigate to
Razberi MonitorCloud tab, and click on Create Account.
Complete the form, and an email will be sent to you with your credentials and
instructions to verify your account.
3.
Contact via email
Razberi Monitor Agent
Razberi Monitor is a .NET agent/application that is installed on all Razberi Core Server
Appliances. This agent runs as a Windows service and is automatically set to start when the
system boots up. To access the User Interface, click on the icon on the desktop labeled
Razberi Monitor. This is the interface to use to review system information, manage
EndpointDefender Layer 2 switches, register your Razberi system with MonitorCloud, and
integration to third party systems like Milestone VMS, Solarwinds, and Syslog messaging
servers. Razberi Monitor uses Windows Authentication for access should you be prompted
when launching.
Registering Core to Razberi Monitor
To register your Core server to Razberi Monitor, you will need to ensure you have already
created a Razberi MonitorCloud account.
1.
On the Core server desktop, launch Razberi Monitor by clicking the Razberi Monitor
icon.
2.
Navigate and click on Razberi MonitorCloud tab.
3.
Enter your MonitorCloud credentials, click register.
4.
You will be prompted with a dialog box to enter the following
a.
Friendly Name of the system.
b.
Account of the tenant that you want to register the system to.
c.
Location
–
if locations are created in the Monitor account, you can select a
location.
d.
Tag
–
if Tags are created in the Monitor account, you can apply them here.
Note: if no Locations or Tags have been created, you can still register the system.
It will appear as "no location assigned" you can assign these items later once you
are logged into your portal.
Summary of Contents for A8
