V14 Overview 33
Table 21. NIC Indicator Diagram
Status
Condition
Link and activity indicators are off
The NIC is not connected to the network.
Link indicator is green and activity
indicator is blinking green
The NIC is connected to a valid network at its maximum port
speed and data is being sent or received.
Link indicator is amber and activity
indicator is blinking green
The NIC is connected to a valid network at less than its
maximum port speed and data is being sent or received.
Link indicator is green and activity
indicator is off
The NIC is connected to a valid network at its maximum port
speed and data is not being sent or received.
Link indicator is amber and activity
indicator is off
The NIC is connected to a valid network at less than its
maximum port speed and data is not being sent or received.
Link indicator is blinking green and
activity is off
NIC identity is enabled through the NIC configuration utility.
PSU Indicator Codes
AC power supply units (PSUs) have an illuminated translucent handle that serves as an
indicator. The DC PSUs have an LED that serves as an indicator.
The indicator shows whether power is present or if a power fault has occurred.
Figure 29. PSU Indicator Diagram
1. AC PSU status indicator/handle
Table 22. PSU Indicator Diagram
Power indicator codes
Condition
Green
A valid power source is connected to the PSU and the PSU is operational
Blinking amber
Indicates a problem with the PSU
Not illuminated
Power is not connected to the PSU.
Blinking green
When the firmware of the PSU is being updated, the PSU handle blinks
green.
CAUTION:
Do not disconnect the power cord or unplug the PSU when
updating firmware. If firmware update is interrupted, the PSUs do not
function.
Summary of Contents for A8
