How To
1. Connect the controller to a PC using the USB to Micro-USB cable.
2. Wait until the Xbox One controller drivers are automatically installed. You can also
manually update the drivers through the Device Manager.
See the answer below for more details.
How to connect the Razer Wolverine Ultimate to PC
1. Pull out the installed magnetized interchangeable D-pad or thumb stick.
2. Line up the new one and slot it in.
1. Select your profile then “Edit”.
2. Select “Assign Buttons”.
3. Select the button you want to edit.
4. Select a new function.
5. Select “Done” once re-mapping is complete.
See the answer below for more details.
How to remap or disable the multi-function buttons on a Razer Wolverine controller
1. Unplug all connections and switch off your controller.
2. Use a lint-free microfiber cloth with an alcohol-based cleaning solution.
3. Wipe the surface of your controller.
4. Use compressed air to blow dust away from the controller’s hard-to-reach areas.
See the answer below for more details.
How to clean your Razer devices
Troubleshooting
Input the complete part or product number that matches the serial number. See the answer below
for more details.
I cannot register my Razer device because either the serial number or part number is not
recognized
Scenarios:
Unable to use the profile switch and button remapping function while the app is active or
minimized.
