background image

2

Need Help?

 Visit our website for replacement parts, product support, a list of authorized service centers in the US and customer service contact information 

at 

www.razor.com

. Please have the product I.D. code (located on the white label of your product) available for better assistance. Additional Customer Service 

contact information is listed at the back of this manual.

BEFORE YOU  BEGIN

Remove contents from box. Remove the separators that protect the components from damage during shipping. Inspect 

the contents of the box for scratches in the paint, dents or kinked cables that may have occurred during shipping. 

Because the scooter was 95 percent assembled and packed at the factory, there should not be any problems, even if the 

box has a few scars or dents.

MAKE SURE POWER SWITCH IS TURNED “OFF” BEFORE CONDUCTING ANY ASSEMBLY OR  

MAINTENANCE PROCEDURES.

 Estimated Assembly and Set-Up Time

Razor recommends assembly by an adult with experience in bicycle mechanics. 

Allow up to 10 minutes for assembly, not including initial charge time. 

Allow up to 12 hours for charge 

(see page 4 for charging information).

WARNING:  

DO NOT USE NON-RAZOR 

PRODUCTS WITH YOUR RAZOR 

ELECTRIC SCOOTER. The 

scooter has been built to certain 

Razor design specifications. The 

original equipment supplied at 

the time of sale was selected 

on the basis of its compatibility 

with the frame, fork and all 

other parts. Certain aftermarket 

products may not be compatible 

and will void the warranty.

  Required Tool

5 mm Allen Wrench

(included)

Brake Lever

Twist-Grip Throttle

Handlebar Stem

On/Off Switch

Charger Port

Reset Button

LED lights for  

E100 Glow only

- Battery  

- Control Module

Limiter

Front Fork

Collar Clamp

Charger 

(Note: Charger design may vary 

from one shown)

Motor

Note: Electric scooter must  

be moving at least 3 mph (5 km/h) 

while applying throttle to  

engage motor.

Product ID Locations:  

(See location to the left)
1.  Handlebar Stem
2.  Underneath Battery Tray
3.  Charger
4.  Box - Side of UPC (not shown)

Plastic Bag Contents: 

•  Charger
•  Allen Wrench 
•  Owner’s Manual

3.

2.

1.

Summary of Contents for 13111261






























Reviews: