background image

With the scooter in the upright and locked position, using a 3mm Allen wrench, adjust the set screw at the baseboard 

until there is no free-play between the baseboard and the steering column. Be careful not to over-tighten this screw as 

it only needs to be snug against the steering column. Verify the adjustment by releasing the steering column from the 

locked position and folding the scooter. The locking lever should not bind and the folding movement should be smooth. 

The spring-loaded mechanism should automatically lock and be fully seated in the upright position.

Baseboard/Steering Column Adjusting Screw(s).

Wheels and Bearings

Under normal circumstances and conditions, Razor wheels and wheel bearings are maintenance free. Nonetheless, it 

is the responsibility of the owner or guardian to periodically inspect the wheels for wear and tear, the axle for proper 

tightness, and bearings for side-to-side play and loose parts. When a wheel or wheel bearing develops play, this is an 

indication of excess wear and replacement is necessary. Replace immediately with only genuine Razor wheels. Worn 

wheels and bearings are considered normal wear-and-tear and are not covered by the Razor Warranty. Wheels other 

than genuine Razor wheels may not be compatible with your Razor scooter. The use of anything other than genuine 

Razor replacement parts may affect your safety and will void your warranty.

Cleaning your Scooter

Wipe with a damp cloth to remove dirt and dust. Do not use industrial cleaners or solvents as they may damage the 

surfaces. Do not use alcohol, alcohol-based or ammonia-based cleaners as they may damage or dissolve the plastic 

components or soften the decals or decal adhesive.

How to Ride

Place one foot on the baseboard, push forward with the other foot. Steer. For enhanced cornering, lean slightly into the 

direction of the turn. For controlled stops, apply the brake by stepping on the rear fender/brake. Razor recommends that 

you practice applying the brake at various speeds and in an open area free from obstructions before riding your Razor 

around others.

       WARNINg:

 

Wheelies 

and other stunt-type riding reduces 

your ability maneuver and control 

your scooter. Take the necessary 

precautions, such as wearing 

appropriate protective gear and 

practice in a area safe for stunt 

riding and free from obstructions.

       WARNINg:

 

Keep 

your fingers clear of the pivoting 

mechanism when folding or

unfolding the scooter.

 CHECk BEFORE RIDINg

Reviews: