background image

5

Need Help? 

Visit our web site for replacement parts, product support, a list of authorized service centers in the US and customer service contact information 

at 

www.razor.com

. Please have the product I.D. code (located on the white label of your product) available for better assistance. Additional Customer Service 

contact information is listed at the back of this manual.

REPAIR AND MAINTENANCE

 Collar Clamp

Using a 5 mm Allen wrench, check that the collar clamp bolt are tightened securely. This item is tightened and quality 

inspected at the factory, but there is a slight chance that the effects of shipping or handling may have caused the bolt 

to loosen.

 Wheels and Bearings

Under normal circumstances and conditions, Razor wheels and wheel bearings are maintenance free. Nonetheless, it 

is the responsibility of the owner or guardian to periodically inspect the wheels for wear and tear, the axle for proper 

tightness, bearings for side-to-side play, and loose parts. When a wheel or wheel bearing develops play, this is an 

indication of excess wear, and replacement is necessary. Replace immediately with only genuine Razor wheels. Worn 

wheels/bearings are considered normal wear-and-tear and are not covered by the Razor Warranty. Wheels other than 

genuine Razor wheels may not be compatible with your Razor scooter. The use of anything other than genuine Razor 

replacement parts may affect your safety and will void your warranty.

 Cleaning Your Scooter

Wipe with a damp cloth to remove dirt and dust. Do not use industrial cleaners or solvents as they may damage the 

surfaces. Do not use alcohol, alcohol-based or ammonia-based cleaners as they may damage or dissolve the plastic 

components or soften the decals or decal adhesive.

WARNING:  

Wheelies and other stunt-type 

riding reduces your ability to 

maneuver and control your scooter. 

WARNING:  

Failure to properly install and/

or tighten the collar clamp may 

cause the rider to lose control and 

fall. If you are having difficulty 

understanding these instructions, 

please contact Razor Customer 

Service for assistance.

Summary of Contents for Black Label R Tec









Reviews: